s_enro: Sunshade from aluminium micro slats

s_enro is the latest product from our range of metal blinds, with which we have successfully been active on the market for around fifteen years.

It features delicately ornate construction and modest installation dimensions. That is thanks to the small winding diameter and the roll-formed aluminium slats, which produce a precise, homogeneous surface.

With its high level of transparency, s_enro provides the interior rooms perfectly with daylight and enables you to look out. A range of different colour variants round off the appearance in keeping with the building.

s_enro product benefits

  • Sunshade product with high transparency for optimum visibility to the outside
  • Modern aluminium look
  • Modest installation dimensions thanks to small winding diameter
  • Low weight thanks to roll-formed components
  • Provides perfect daylight
  • High reduction in solar energy
  • Choice of colour scheme
  • Extremely wind resistant, suitable for tall buildings

The standard blind colours

White (similar to RAL 9016)

Silver (similar to RAL 9006)

Grey aluminium (similar to RAL 9007)

Anthracite grey (similar to RAL 7016)

Anthracite (similar to DB703)

Technical benefits

As soon as the sun rises to more than 21º above the horizon, any direct penetration of the sun’s rays is completely cut out.


The blinds conform to wind resistance class 5* (equates to resisting winds of up to 21 m/s). This makes s_enro much more wind stable than conventional external blinds and textile awnings.


* Dependent on dimensions and installation situation

The blinds are able to prevent up to around 90 % of incident solar energy. Air-conditioning costs can thus be greatly reduced or air conditioning not used at all.

A high level of transparency from inside to outside thanks to an opening percentage of c. 24%**.


** With a sightline angle from inside of 16°

The aluminium micro slats can be easily recycled.


View of slats from outside

Material: Aluminium micro slats, roll-formed

Width: min. 0.65 m; max. 3.00 m

Height: max. 4.50 m

Surface area: max. 12 m2

Blind weight: c.  5.2 kg/m²

Energy reduction: gtotal = 0.09 (1),  gtotal = 0.05 (2)

Wind stability: max. resistance class 5*

Drive system: 230V tubular motor

Control system protection requirement: Wind monitor and frost sensor


We reserve the right to make technical changes without prior notice.



(1) Metal blind in combination with thermally insulating glazing (total energy transmittance of the glazing as per EN 410: 0.53)
(2) Metal blind in combination with sunshade glazing (total energy transmittance of the glazing as per EN 410: 0.36)

* Dependent on dimensions and installation situation